I have a 2011 single F300 digital on my Grady. The past 2 summers the binnacle has been acting up where there is a rough spot when accelerating the throttle. If I move the throttle back and forth it eventually loosens up and is OK. So far, I have not found a fix for this short of taking it all apart which I am reluctant to do so I have learned to live with it so far.
Moving on to this summer. The past couple of trips I have noticed that when I turn the key to start the engine nothing happens. No clicks, nothing. I then move the stick into forward gear and then back into reverse a couple of times and back to neutral. It then will start. This leads me to believe there is an issue with the neutral safety lockout in the binnacle.
Is there a fix for all these issues or do I need a new control box? If so does anyone have a good part number? I believe that Yamaha has discontinued my particular box. Also, If a new box is required, it has to go to a Yamaha dealer so the new box can be paired with the ECU. Any help on this would be appreciated. Thanks.
Announcement
Collapse
No announcement yet.
F300 digital neutral safety switch
Collapse