yamaha 25hp 4 stroke 2011 and tachometer

[dalmatinac]

hi
I have yamaha 25hp 4 stroke 2011 and I connect tachometer 6Y7-83540-80
Tachometer have in backside switch 4/6/!"P and to which number to put of these three and whether there is a possibility to connect oil lamps and temperature
regards

[fairdeal]

As for the pole setting:





I would need to research to understand the reasons,
but it appears the 2011 F25 is not able to illuminate warning lamps on that tach.

[dalmatinac]

whether my tachometer is working properly regardless of the indicators that are not working?

thank you very much

[fairdeal]

The indicator lamps are a completely separate function from the engine rpm display

As far as I know,
the -80 tach will work with your engine to indicate rpm -
its only the warning lamps that will not

(and to repeat, I haven't personally looked into the "why"
I'm just sharing Yamaha's chart which shows compatibility)

[dalmatinac]

thanks for the instructions essential to make the tachometer work
regards

[boscoe99]

Do you not know the stuff that comes after the F25 in the model identity?

[dalmatinac]

do you not know the stuff that comes after the f25 in the model identity?

ft25fetl 2011
6blk l1001343

[dalmatinac]

Ft25fetl 2011
6blk l1001343

[99yam40]

The indicator lamps are a completely separate function from the engine rpm display

As far as I know,
the -80 tach will work with your engine to indicate rpm -
its only the warning lamps that will not

(and to repeat, I haven't personally looked into the "why"
I'm just sharing Yamaha's chart which shows compatibility)

looks like he needs the 6Y7-83540-20 instead of the 6Y7-83540-80
I am guessing that the RC means remote control in the wording mechanical RC?

[boscoe99]

Ft25fetl 2011
6blk l1001343

Looks to be the equivalent of a USA model T25A.

Does your motor have two warning lamps at the front of the bottom cowl? It appears that you can disconnect the coupler to the cowl mounted lights so as to connect a wire harness that will run to you tachometer.

A simple modification may be needed to the tachometer.

[boscoe99]

------------------------

[dalmatinac]

Looks to be the equivalent of a USA model T25A.

Does your motor have two warning lamps at the front of the bottom cowl? It appears that you can disconnect the coupler to the cowl mounted lights so as to connect a wire harness that will run to you tachometer.

A simple modification may be needed to the tachometer.

I have two led light temp. and oil. but on the tachometer there are two ordinary light bulbs