If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Excessive smoke, hard idling, and electronic pumps runs constantly after alotted time
50 psi on the rail on an OX66 is 15 PSI to high and will run pig rich.
50 PSI on the medium pressure rail on an HPDI would be good.
NOT on an OX66.
the ECU doesnt monitor rail pressure and does not know its 15 PSI above desighn limits but will turn on the injectors assuming pressure is still 35 PSI.
so we have way to much fuel,almost 50% more.
Comment