1996 yamaha 25hp manual to electric start conversion

I have a 1996 yamaha 25 hp outboard model # C25MSHU that is pull start only. It has been an excellent motor for several years. Rather than spend alot for a new electric start outboard or a used one with a questionable past, I would like to convert my outboard to an electric start.

Can anyone tell me if this is possible? If so what are the part numbers for the components I would need? Is there a conversion kit available for this project and if so what is its part number?

Another option that I have considered is to find a similar motor that has been damaged in a way other than the electric start and use the old parts off of that motor to convert my motor. If this is a possibility, I would like to find someone with these parts to deal with.

I tried posting this question on iboats.com and didn't get any answers.

I really appreciate any help I can get.

[boats.net]

You would need all parts listed at
Yamaha Outboard Parts 1996 C25ELRU STARTING MOTOR Diagram
Number 32(695-15772-40-94), 52 and 53 at
Yamaha Outboard Parts 1996 C25ELRU STARTER Diagram
All parts listed except for 22-29, number 1 is for remote control model, may have do your own wiring.
Yamaha Outboard Parts 1996 C25ELRU ELECTRICAL 2 (C25ER - EH) Diagram

Thank you very much, that is exactly what I was looking for.