If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am in need of 2004 rigging guide. I am looking to change out gauges to Yamaha digital and am confused. Some say there are different gauges for 05 and newer. Looking to change tachs and speedo. Any help would be appreciated.
For the 2004 motors you would use:
6Y5-8350T-82-00 Multifunction Tach
6Y5-83570-S5-00 Multifunction Speedo
68F-82553-90-00 Trim/Oil Harness(connects to engine and gauges, 2 four prong connectors)
6Y5-83553-N0-00 Gauge power/tach signal harness(connects to key switch and gauges)
If you already have Yamaha gauges with warning lights you may not need wiring harness's.
a monkey wrench was just thrown in. I'm being told one motor is 2005.
How can I tell the year of the motors for sure. I bought them new as a package on my 2004 boat
Yes they will look alike. For the 2005 order a 2 gauge kit 6YR-W0035-F2-00(includes Tach, Speedo and harness's needed) then for the 2004 order 6Y5-8350T-82-00 Tach, 68F-82553-90-00 trim/oil harness and 6Y5-83553-N0-00 power harness.
Decided to use speedo on GPS and found part # 6YR-W0035-15. Is this the correct rig kit for my '05 and do I need a seperate power harness for the '04 or can I join with the '05 harness
Comment