If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
anyone know what the P/N would be for the 2 pin shutoff harness (eng side) for a 2006 4 stroke 15 horse outboard? The contol came with a 2 pin cord but I need the engine side to connect it. Thanks
Not sure what harness you are referring to. The 703 should have a key switch in it and either a 7 pin or 10 pin main harness that connects to engine. The main harness has the shut off wires in it.
Tweet
Comment