2002 225 four stroke,ran fine out to dinner after started home ,started fine idled out about 5 minutes then stalled when tried to throttle up would only restart if primed bulb throttle up and stall only start again by priming bulb done this about 6 times then had someone constantly prime bulp till at 5000 rpm cruising,they stopped priming bulb and ran fine for rest of 15 mile trip, any ideas.
Announcement
Collapse
No announcement yet.
Prime bulb to keep running
Collapse
X
-
Hi, the best place, for the best price is most likely this web site. for the part number go to the Yamaha outboard page and look for your year and model, then look for the low pressure pump and it will give you the part number.
Dennis
Comment
 -
OPPS' Sorry, I posted the high pressure pump, thanks for catching my mistake, jb123. I looked again, and I am not so sure of there being another pump. Click on the link at the bottom of this page for Yamaha parts, and see what you come up with.
Dennis
Comment
ÂÂÂÂÂ
Comment