If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have fuel gauge digital tachometer 250 yamaha but never indicate the exactly position for fuelgas, what shoud i check to test and solve that matter ? any help
If it's the fuel gauge not reading fuel level in fuel tank then it's probably a bad fuel sender in fuel tank. Remove the pink wire from fuel sender on top of fuel tank, turn ignition key on and touch pink wire to ground wire on sender, if gauge goes to full position then gauge and wiring is ok.
Tweet
Comment