Tilt/Trim Indicator

[Spike]

Purchased a 2000 Wellcraft w/twin 150s. Port engine tilt/trim indicator guage reads down all the time. Any ideas. Want to check sending unit and need to know location.

[jb123]

it is mounted on the inside left motor bracket and activated by a tab on the tilt tube and easier to locate with motor tilted all the way up. once you see it use some penetration oil and try to work it loose.

[Spike]

jb123--Thanks, I will look when it stops raining

[Ken]

Spike,
A note of caution - be sure and drop down the t/t locking lever when you raise the motor all the way up before you get under there.
Good luck [img]smile.gif[/img] ,
Ken K