Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

rough between 3600 and 3900 rpm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rough between 3600 and 3900 rpm

    ok heres the problem, the engin starts great, it idles around 700rpm and runs nice and smooth until 3600rpm,,, from 3600-3900 the motor studders until i get to 4000 rpm from there to 4700 it runs nice and smooth, any suggestions would be great thanks, btw i replaced both fuel pumps and also the fuel lines, i ran sea foam through the carbs and the spark plugs are new thanks alot scott

  • #2
    and...what kind of motor are you referring to?

    Comment


    • #3
      its a 1994 yamaha 150 saltwater series with 240 hours on the motor

      Comment


      • #4
        i would breakdown clean/soak carbs and clean each orifice.replace all worn aluminum washers and main jet o-rings.

        Comment


        • #5
          hopefully this helps some, i cleaned all 3 carbs and it took care of the problem, the boat runs great thanks

          Comment


          • #6
            goodnews!!

            Comment


            • #7
              hi jb123
              what do you call "aluminium washers"?
              are they in the carbs?
              frenchy

              Comment


              • #8
                yes..on the main jets and drain screws...they corrode quite easily.

                Comment

                Working...
                X