Opinions on protective spray

[pstephens46]

Need a coating for engine to protect against salt. What do you guys use?

[rodbolt17]

fluid film or boeshield T9.

[robert graham]

I use white spray lithium grease on my tilt and trim motor, pump and bracket and it sets up and stays on there very well, even with salt spray....under the cowling I use a light spray lubricant with an old toothbrush to apply and clean any areas of possible corrosion. Yamaha makes a spray Protective Coating that seems to work well....

[cpostis]

fluid film or boeshield T9.

Boeshield T9 is really good. I use it, but it is very expensive (not compared to expense of repairs/replacement of corroded components and avoidable breakdowns). The thing about it is, I researched T9's chemical make up. Basically it is about 65% odorless mineral spirits/35% white mineral oil. Haven't tried mixing and using it yet, maybe I will when my $20 can runs out.

[pstephens46]

Thanks for replies. I shall buy a can. Very specific use for me so I expect it will last several years.

[Zara Spook]

https://www.youtube.com/watch?v=3H6zfUcijWQ