Kill Switch and Electric Choke Circuits

[NB Boater]

I have a 70ELRU.
Electric choke works, engine starts fine. Once running the electric choke will not work, the ignition kill switch does not work and the tether kill switch does not work. Had to pull wires from the plugs to shut her down. Just started trouble shooting and I was hoping someone might recognize the symptoms and point me in the right direction.
Thanks

[99yam40]

I would think you have lost a ground wire from the key and kil switch, not sure about the choke but the electric choke also needs a ground to operate.
I would be looking at all grounds on motor and thru harness.

[panasonic]

One would think that the kill switch would have its own ground??