Trim / Tilt assembly TLRC70

[JDDsdogs]

I need to remove the power tilt / trim assembly from my 2004 TLRC70. Do I need to dismount the entire motor in order to remove the assembly or can it be removed without having to do that?
Both the trim and tilt leak down (from full up to full down over about 30 - 40 minutes.
Thanks in advance for any advice offered.

[boscoe99]

Should be able to remove it in situ. Raise the motor to the full up position. Lower the locking device. Lower the motor onto the locking device.

[99yam40]

if in a bind loosen one side of the bracket mount to boat a little

[JDDsdogs]

Thanks guys, I appreciate the info.