Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

yamaha F40 four stroke carbs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • yamaha F40 four stroke carbs

    my carburetor needs to be cleaned. I miss a drawing of them. someone who can help with that. thanks in advance

  • #2
    What model F40?

    Comment


    • #3
      Its from 1999

      Comment


      • #4
        If this is a model F40TLRX, would it be easier just to post that

        Comment


        • #5
          Correct F40TRLX.

          Comment


          • #6
            Here is the drawing

            1999 F40TLRX Yamaha Outboard CARBURETOR Diagram and Parts

            A better copy of the drawing is available at www.yamahaboutboards.com

            Go to the parts catalog there and look up your motor. Open the illustration for the carburetors. For instance.
            Last edited by boscoe99; 10-18-2016, 03:43 PM.

            Comment


            • #7
              Thanks. This will be helpful

              Comment


              • #8
                By the way, the F40 carburetors are some of the most complex and difficult to clean. Carbs need to be fully disassembled and cleaned in a heated ultrasonic cleaner using a good cleaning solution.

                Blow all passageways and maybe use a piece of soft copper wire to rod out any orifices. Count the number of turns for the idle mixture jet before you remove it from the carburetor.

                A vacuumate will help to synchronize the carburetors after they are reinstalled.

                Comment


                • #9
                  Thanks boscoe

                  Comment


                  • #10
                    1999 F40TLRX. Took my carbs apart and cleaned and did not count the turns for the pilot jets. Any way to know where they should be set? It seems to be running fine on the muffs with the jets bottomed out???
                    Last edited by gibrlj99; 09-26-2018, 06:31 PM.

                    Comment

                    Working...
                    X