Tweet
Long shot here...but I am at the end of the road with troubleshooting my issue, so here it is. 2010 VF200LA is runs fine while moving but if I sit at idle too long I get the overheat alarm. The tale tell pees hard while up but will dribble and eventually cut off and or steam if at idle too long. I have done the thermostats, the impeller, and flushed the system with rydlyme and still the issue returns. When I pulled the thermostats I looked inside and it seems clean to me. Open to any ideas on what to do next. Also worth mentioning that when I hook the hose up to flush the motor the tale tell will sometime pee and other times will either dribble or nothing at all. Thanks!
-
-
Impeller change only or the complete water pump? -
Whole pumpComment
-
-
Kit Includes:
1 Cartridge Insert 61A-44322-02-00
1 O-Ring 93210-86M38-00
1 O-Ring 93210-37M67-00
1 Impeller 6E5-44352-01-00
1 Woodruff Key 90280-04002-00
1 Cartridge Outer Plate 6CB-44323-00-00
1 Water Pump Gasket 6CB-44315-00-00
2 Dowel Pins 93606-12019-00
4 Bolts, With Washer 90119-08M14-00
Comment
-
Think I fixed it. Was missing the water damper seal from the previous owner. I bet that fixes it. Check your sealsComment
-
plastic water pump housing is not included in the kit and could be a problemOriginally posted by Gunnersmg View PostComment
Comment