704 control box bolts?

[DannyMart]

I had the trim and tilt switches on on m dual 704 binnacle changed. The mounting bolts on the 4 corners of the control box were frozen and were damaged during removal. The shop said they couldn't replace them. I've looked on several sites for those bolts, but have been unable to find the 4 bolts as a unique item. Does anybody know the specifications for those bolts? Thanks in advance.

[TownsendsFJR1300]

Don't know the spec's but any reason why you can't tap make new threads?

.

[boscoe99]

Shame on the shop.

Part numbers are shown right where they are usually shown. In the Yamaha parts catalog.

https://www.boats.net/catalog/yamaha...cle-704-single

[DannyMart]

Shame on the shop.

Part numbers are shown right where they are usually shown. In the Yamaha parts catalog.

https://www.boats.net/catalog/yamaha...cle-704-single

Thanks- I looked for that control box parts diagram, but wasn't able to find it. I'm not happy with that shop. They installed a second bilge pump during the same service visits and put some 18 gauge wire in the circuit that needs a 15 Amp fuse.