Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

would 6Y5-8350T-83-00 digital Tach meter work with my 2019 Yamaha 70 hp?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • would 6Y5-8350T-83-00 digital Tach meter work with my 2019 Yamaha 70 hp?

    would 6Y5-8350T-83-00 digital Tach meter work with my 2019 Yamaha 70 hp?
    I know there is a new model? 6Y5-8350T-D0-00 replacing -83 meter.
    Would this work with my 2019 Yamaha 70 hp too?
    Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

  • #2
    Yes, it will work. Harnesses also needed.

    Comment


    • #3
      Originally posted by boscoe99 View Post
      Yes, it will work. Harnesses also needed.
      ya, the wires are too many so I decided to buy a 6Y8 instead.

      see wiring diagram and parts required.

      can you please confirm whether this wiring is correct?
      Attached Files
      Last edited by Yamaha18; 1 week ago.
      Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

      Comment


      • #4
        Would this diagram work?

        Not sure about the GPS, power cable of 6YD-83553-00-00


        6Y8 Tach wiring.jpg
        Last edited by Yamaha18; 1 week ago.
        Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

        Comment


        • #5
          The 6Y8 tach is a much more useful device than the 6Y5 -
          I'm sure you'll like it.

          Originally posted by Yamaha18 View Post
          [SIZE=24px][B]Would this diagram work?

          Not sure about the GPS, power cable of 6YD-83553-00-00
          yeah, no - I don't think that is quite it.
          ​​​​​​​Close.

          Do you have a Raymarine MFD that you want to also have engine data?
          and if so -
          do you have other NMEA 2000 devices / a NMEA 2000 backbone?


          Comment


          • #6
            yes, I have Raymarine Axiom MFD and NMEA 2000 backbone to display engine data using Yamaha 6YG-8A2D0 currently. There are 3 problems: (1) RPM would not display when I get on water, (2) takes about 2 minutes for the Total engine hour, trim level to show when first start up, (3) Now after using it for 3 times, total engine hours stop displaying so currently troubleshooting it. A big pain in the BUTT.

            ok, I found a picture of 6YD-83553 and no it would not fi because it has 4 male pins instead of 4 female pins as the pigtail wires.

            I also found the Yamama Engine interface cable https://amzn.to/2p3CRmY may possibly work, but just unsure whether it will pickup engine data from the Yamaha 6Y8 tach gauge in the CL network.see my revised wiring diagram.
            Untitled.jpg

            Originally posted by fairdeal View Post
            The 6Y8 tach is a much more useful device than the 6Y5 -
            I'm sure you'll like it.



            yeah, no - I don't think that is quite it.
            Close.

            Do you have a Raymarine MFD that you want to also have engine data?
            and if so -
            do you have other NMEA 2000 devices / a NMEA 2000 backbone?

            Last edited by Yamaha18; 1 week ago.
            Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

            Comment


            • #7
              It looks like the 6Y8 gauge allows people to digitally***** fishing their Outboard. Am I correct? please help and thanks.
              Last edited by Yamaha18; 1 week ago.
              Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

              Comment


              • #8
                The 6Y8 looks like it has the *****ing for fishing function. Am I correct?
                Captain steve - 1974 wellcraft airslot 165 with 2019 Yamaha 70

                Comment


                • #9
                  Yes, the 6Y8 gauge offers the troooling function.

                  Comment


                  • #10
                    or maybe it is the tr0ling function

                    Comment

                    Working...
                    X