1990 50hp idle air screws

[johnlassiter]

I have a 1990 50hp 50esdjd just rebuilt carbs all new fuel lines, filter and pump can anyone tell me the idle air screw ajustment

[boscoe99]

1 and 7/8ths, plus or minus 1/4th turn.

Hopefully, you now have your reminder to turn the screws in until lightly seated and write down the measurement for future reference.

[rodbolt17]

not gonna happen boscoe.
and to the originator of this post, the air screws aint why it still wont run.

[johnlassiter]

runs great will not idle

[boscoe99]

Make that one and seven eighths turns from lightly seated. I used a table showing idle mixture screw values and picked the wrong year 50 HP model.

Sorry.

It was actually a test to see if Rodbolt was still sober. Apparently he is.

[rodbolt17]

1 3/4 turns is about right.
however I doubt that's your problem.

occasionally I have some cool refreshing beverages before keyboarding.
gets me in trouble occasionally.

[countrytn]

1 3/4 turns is about right.
however I doubt that's your problem.

occasionally I have some cool refreshing beverages before keyboarding.
gets me in trouble occasionally.

they wont give you a typing while drinking ticket so let r rip

[rodbolt17]

maybe not.
but you can get banned from a site .
when you did the carbs, did you do the fuel pump?