1996 Yamaha Pro 60 Tiller warning buzzer

[JPJ]

Will do. I don't like unexpected problems.

[99yam40]

OK that solved that mystery.
have fun with it.
make sure you test it out once you install the buzzer

not good to expect a warning but it does not come when a problem shows up

[JPJ]

I just reread my last post. I can see where there might be some confusion. I meant to say, I can see where the pink wire lead goes into the connection of # 20 from # 18. I do not have wire harness # 20. It ends with #18. I also do not have a OEM Yamaha tach. My boat has a Teleflex tach on it, I would like to have an OEM tach. Maybe in the future. Thank again.

[99yam40]

Well I though he said he did not have a tach, so all of the dead ended wires have to be shoved in some where that he found

[boscoe99]

[99yam40]

Boscoe,

I located the wires coming out of # 20. Now I will get a warning buzzer and figure out a place to mount it. Thanks for all your help and input. I will have peace of mind knowing I will have a warning buzzer.

Thanks again !

Hold on now you cannot just leave without telling us where those wires are located and where/ what the rest of that wiring harness goes to

[JPJ]

Boscoe,

I located the wires coming out of # 20. Now I will get a warning buzzer and figure out a place to mount it. Thanks for all your help and input. I will have peace of mind knowing I will have a warning buzzer.

Thanks again !

[boscoe99]

It is item #20 that I am talking about. Wherever it is located. Inside or outside the cowling.

[99yam40]

I thought it showed #18 coming out of the front of the motor and # 20 plugged into that

[boscoe99]

Do you see the wire harness that comes out of the motor? Item #20 in the illustration?

[JPJ]

I am at a loss in finding those wire pigtails ( yellow,pink) I will look again this weekend and hopefully have success in locating them. When i do I will report back. Thanks for all the info !

[99yam40]

We would order an engine in and install a handle kit with no horn. The engine came with a harness and a horn
but tech support could not tell you how to hook it up inside the cowling with a handle.

Were the motors an H or a R model?

What did you do with the external wiring and horn?
was the rest of the external wiring harness for a tach?

[boscoe99]

Most boats I rigged did not have a tach. I started to wire them inside of the cowl.

How did the user view it?

[walleye1]

Most boats I rigged did not have a tach. I started to wire them inside of the cowl.

[boscoe99]

Maybe the buzzer is mounted outside of the motor. Like a tachometer would be.