Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

yamaha 130hp 2 stroke

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • yamaha 130hp 2 stroke

    tilt will not work, and its down. How do l get it up manually to get out of water.

  • #2
    Manual relief valve through on either side of transom bracket, takes a flat blade screw driver.

    Comment


    • #3
      Once the screw is fully turned outward grab the lower unit and pull like hell. Then pull some more and hold it. It will slowly start to come up. Get it fully up and then use the lock to hold it in place.

      Comment


      • #4
        A little confused, are you saying there is two screws on each side of transon, l screw them and try and lift .

        Comment


        • #5
          PS would these screws be below water , as the engine is down

          Comment


          • #6
            should be one screw on one side that you can turn.
            service and owners manual should have this info.
            probably also on the motor itself some where
            should have an arrow on which direction to turn it to release.

            as far as if under water, it depends on how low your a$$ end of the boat sits

            Comment


            • #7
              Originally posted by woodside View Post
              PS would these screws be below water , as the engine is down
              Different motor but close I might guess.
              not sure how it will be lifted if in water. Can you get boat on trailer with it down?

              Comment


              • #8
                dang that motor is missing the lower unit

                Comment

                Working...
                X