"Check Engine" on Guage

[walleye1]

It is a engine monitor display on the dash that is hoked to the engine.

[oldmako69]

How do you determine if you have Command Link? I don't recall seeing anything about this feature in the owners manual. Do my 2005 F225 TURD's have that? If so, where are the codes displayed, explained?

[rodbolt17]

yes it can.
you can also,if command link equipped, simply turn the key on. press and hold the mode button about 15 seconds, any active codes will then be displayed.

[No Bail]

My boat has twin Yamaha 250's. F250 & LF250 from 2006. They have about 1300 hours. 1000 mile check done last year.

While running out for albacore I sometimes see my starboard F250 flash a "check Engine" message on the guage. I will then check the guage and the temp, oil and voltage all are good. I can clear the message with the mode key.

I am ordering YDIS 1.33 from a fellow boater. Can this program tell me what this warning means?

Any advice as to what I need to check?

Randy in Oregon.