If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My 2008 runs great but the sparkplug ends keep unscrewing and the plug wires fall off. Has anyone else had this problem? its happen 4 or 5 times in the last 3 years. Can you use locktite on these ?
I wouldn't use lock tight since it might interfere with the electrical conductivity. You could run a section on mono fishing line through it and the screw it down tight, it kind of makes it a locking nut. Put the plug wires back on and then use zip ties to keep the boots tight around the plugs.
Comment