plug wires

[islandman1]

I have a 1999 Vmax . Trying to trouble shoot intermittent missing mostly at 3500 and higher RPM. Have replaced everything fuel related as well as plugs and battery.I suspect I may have an issue with plug wires . Are these wires carbon core or wire core and can they be easily tested?

[rodbolt17]

can we get a model number, V-max was a standard mo****r for several bass boat models.

[islandman1]

Its VX200TLRF if I am usng the chart correctly.

[boscoe99]

The model identify should be on a data plate on the left hand clamp bracket.

[islandman1]

Opps, here is the correct # VX200TLRY on the left hand clamp.

I stated in the original post it was a 1999. That was on the label attached to the right clamp bracket saying it was manufactured in 1999. But the left clamp number refers to a 2000 model with the 'Y" .

[rodbolt17]

the wires are a copper alloy and NOT removable from the coil.
you use the secondary resistance test.
the caps unthread from the plug wire and are tested seperatly.
you have a V(bass boat) OX66 that does NOT use CCS.
its a 3.1L not the older 2.6L.

[islandman1]

Thank you sir! I am new hear but I have reviewed about 2000 posts from the past many of which are your replys.I can see there is are some real knowledgeable guys on here. Very impressive information source.