Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

1990 150 ETLD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1990 150 ETLD

    Im stumped.I have spark on 4,6,1,3 no fire on 2and 5.voltage high from trigger changed out cdi 2 same senario I ll change trigger next coils are good swapped places they fire .the question i have can i swapped out long wire trigger for ashor wire and splice a pigtail on any help appreciated Wayde

  • #2
    if im not mistaken those 2 shutdown at idle and will crankup at a higher rev...check at 1000 and over, while running,pull each plug wire and listen for the change.what are your symtoms when trying to run the motor?? so many times owners want to blame electronics when its a fuel issue and your older carbs probably need a good cleaning.

    Comment

    Working...
    X