Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

150 saltwater series idle problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 150 saltwater series idle problem

    My 150 saltwater series 2 98 carbureted motor will not idle. I adjusted the pilot screws with no luck. I have began cleaning my carburators and expected to find alot of gunk in there causing the problem. The carbs were clean. Two thugs I found was that the pilot screws were worn ad had rings. Also, the needles had rings. I have ordered new pilot screws and needles. I was wondering if anyone thought that this will solve my problem or if there was anything that I am not currently considering as a source of my problem. Thanks .

  • #2
    carefully inspect the pilot fuel and pilot air jets and passages.

    there is NO A/F mixture screw on that carb.

    let the arguments begin.
    I'll shoot you down.

    Comment


    • #3
      $260 for six new needles and pilot screws, ***. hope this does the trick.

      Comment

      Working...
      X