Tweet
How hard is it to replace the seals at the bottom of a Yamaha SX 150 2002. Someone quoted me $1000.00 to repair it. He said it was the "manifold" and the engine had to be lifted to get it off?
-
-
that unit can be removed without engine removal.
manifold leakage is not that uncommon with the showa unit,OMC used the same unit.
if the manifold surface is not warped its 6 orings and your done. -
Trim unit removal
Just removed my from sx250txrz. I took about one hour and that's after I figured out that the trim cylinder must be retracted for the whole unit to come out. Leave the whole thing to soak in WD40 for a couple of days.
Good luckComment
-
did you lock the engine in the up position to get it off? the oil leaked out of the reservoir so I'll have to somehow get the engine up so i can get at the main piston to disconnect it from the engine.Originally posted by cichucki1 View PostComment
Comment