F40LEHA tiller to remote steering?

[McShip01]

I'd want to covert my tiller to remote steering. What are all the parts I need to do this? Thank you.

[boats.net]

Just remove tiller handle, install a steering hook, steering guide link arm, control box(choice of side mount or binnacle mount) and two control cables.
65W-48511-01-00 Steering Hook
6BG-61350-00-00 Steering Guide
703-48207-1A-10 703 side mount control box, 16ft 10 pin harness
and two MAR-CABLE-xx-SC(replace xx with length cable needed) control cables.

[McShip01]

Thanks for you time. Does this affect the warranty? Its a 2012 model.

[boats.net]

No it wont void warranty.

[McShip01]

I'm going with the binnacle mount, what is the product code for that instead of 703-48207-1A-10 703 side mount control box, 16ft 10 pin harness

[rodbolt17]

with the binnicale mount you will also need a key switch assy and a 10 pin main harness.
for gauges you can use either the analog,digital or command link.

[boats.net]

704-48205-P1-00 704 Binnacle Control box
704-82570-10-00 704 Key Switch panel
688-8258A-60-00 20ft 10 Pin Main Harness(16', 23', 26' and 31' also available)

[oarfish1]

I just convereted a 2008 2 stroke 25hp. from remote to tiller.
Not sure about the parts fitting your motor, but if you can use them pm me.