If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a 96 Proline 240 with original gauges put a 2006 z300hpdi on it last year. I just ordered rigging kit 6yr-w0035-f2-00. I was told it was all I needed, but installation instructions show at least one multi hub. What all do I need?
Command Link gauges uses the multi hub but the 6YR-W0035-F2-00 is the standard multi function gauges(not Command Link) and doesn't use the hub, that kit will include the wire harness needed to install.
Tweet
Comment