I have replaced gas line to tank from filter to motor gas joint at motor and had carb's rebuilt it runs fine for a long time and then bog's like it is missing or running out of gas but it stays running 1/4 runs fine get to 3/8 to half and sounds like it is skipping or running out of gas like a boging sound and i will let it idle for about a min. or so and it will takeoff and run fine it dont do it at the same running times it can run 30 mils or run 4 mils and do it. but i have not replaced gas joint on motor it has a 1/4 gas line running to built in filter on motor vent to gas tank is open


Comment