change prop, mounting hole, or both

[Eazy Mony]

I would still look at the mounting height, I am currently running a 4blade 15pitch prop on mine and run at 6000rpm WOT, I'm also 2' longer with a hardtop and have to be several hundred pounds heavier than your setup. I may yet try a 3 or 4 blade 17pitch.

Skinny, I was hoping to hear back from you...It sounds as if I should give one more try at trying to get just a few more RPM's. Heading to Seward for the big weekend, so I am going to pick up a 3 blade 15P Stainless and see where the numbers come out. I sure dont want to loose the performance that I have gained and I feel the mounting height is good in the #3 hole. I will have a chance to try both blades and hopefully will leave with the best setup.