130 beto v4

[The block]

Hi my 130 v4 oil pump recently packed up which then the alarm sounded for low oil. I found the pump seized so replaced it with a new one but now will not pump when low level is reached. I have checked the float switch which seems to be working fine any Ideas . Could it be anything to do with the manual overide unit.

[99yam40]

could be the inline filter or a pinched oil line.

[The block]

When the pump is not working I mean its not getting the signal to come on at low level as when I flick the manual override switch I can fill the engine mounted resevoir.

[rodbolt17]

either the switch in the remote tank is open, SWB or the oil control module burned out or the engine tank switchs are bad,SW2,SW3.