Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Driveshaft endfloat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Driveshaft endfloat

    Hi,
    I just built up Yamaha 200 lowercase with new bearings and seals.I used same shims same places.
    Now i wonder should driveshaft have up and down play, because it`s feel little bit stiff then turn it?
    Waterpump and impeller isn`t not yet installed.

    Thanks,

    Pete

  • #2
    If you replaced bearings it needs have the shimming check. Take it to your dealer and let them check the backlash and possible reshim

    Comment

    Working...
    X