If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need to check my crank position sensor ,My manual tells how to check the resistance ,at 68 degrees, Does this mean at at least 68 degrees or it has to be 68 degrees.
The air temp affects the resistance reading and the specs are taken at 68 degrees, if it's 90 degrees out like it is here the readings will be off from specs a small difference in readings is ok but a drastic difference is bad.
Tweet
Comment