If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am looking to add a second tilt/trim switch to use on my 2005 F75 tiller but I am not sure what wires to connect to. There are a lot of extra leads coming off the wire harness. Any idea what color wires I should be looking for?
Haven't looked at tiller handle to see if has extra trim switch leads, look coming off of key switch to see if has a red, green and blue set, that is the trim switch wires, if don't have then will have splice into wires going to trim switch on engine cowling.
Tweet
Comment