Tweet
I disconnected my oil tanks so that I could mix fuel/oil myself. Is there any specific wiring I have to do so that my boat doesn't go into limp mode. Or bypass oil sensors so that my alarms are disabled? 1994 yamaha 130s twin
-
-
Yes. You have to trick the system into thinking it has oil in the tank. -
Zip tie on the float.Comment
-
Which floats?...sorry I'm new to this. The oil tanks attacked to the engine are out...I removed them along with any connections. How do I trick the system?Comment
-
Blue/green stripe,Blue/red stripe,Blue/white stripe are the 3 wires need disconnected
LoboJim this is what I would do but proceeded at your own risk. Hope this helps LobojimComment
-
The float on the engine tank but if it is gone then you need to do it via wiring as suggested.Comment
-
ok
I cant stand it.
I gotta ask.
WHY would anyone remove the most bullet proof dead nuts reliable variable ratio oiling system ever built to premix?
most oiling system mechanical failures I ever see are with premixed motors.Comment
Comment