tiller to remote question

[boscoe99]

Would these parts fit the 1996 25hp model?

Start your own new thread. Provide the complete model and identification of your motor. Tell us what it is that you want to do.

[outdoorsman]

96 Conversion

You would need
6L2-48501-11-00 Remote attachment kit
689-61350-02-00 Steering guide attachment
6J8-48511-51-4D Steering Hook
703-48230-15-10 Control Box
order 2 control cables, MAR-CABLE-xx-SC(replace xx with length of cables needed)
For the key switch and choke to operate from control box you would need:
(1)6L2-42725-50-00
(1)6L2-86111-00-00
(1)682-86117-00-00
(1)6L2-86115-00-00
(1)98580-05008-00
(2)92990-05600-00
(1)90480-10155-00
(4)98508-04008-00
(4)92990-04200-00
(1)6L2-86112-00-00
(3)97013-06012-00
(3)92990-06100-00
(1)93210-03261-00
(1)6L2-82590-00-00
(1)6K3-82557-00-00

Would these parts fit the 1996 25hp model?

[summitradon]

Do you still have the tiller arm for the 2007 Yamaha 25 that you were converting to remote steering.
Alan 970-470-3613

[summitradon]

Yamaha Tiller arm

I have a 25 hp elect start 07 yamaha on a carolina skiff. I want to change it to remote steering ...My motor is 25ESH ..serial 6L2K S 1024831....What parts do I need to make this conversion.....should I add engine gauges to the console?....I know that there is a steering bracket that attaches to motor that I can't find..Where do I get that bracket......I'm pretty handy...What tools do you need to make this change? ...I have a good Idea, but I want to make sure before I buy....would I need a Remote Conversion Kit?

I know this is a longshot but here goes.
Do you still have the tiller arm off the 2007 25 HP motor that you were converting to remeote steering>
Alan 970-470-3613

[boats.net]

On the 25 it normally has a couple feet of harness and control box harness connection is outside cowling.

[dcc134]

what do I do?

I have question about the wire harness.....When you connect the remote end and the motor end of the wire harnesses, is the final connection inside or outside of the motor cowling.....how are the wires run if the the connection is inside....do the parts that you listed above include parts that seal off the motor from water???????

[dcc134]

I have question about the wire harness.....When you connect the remote end and the motor end of the wire harnesses, is the final connection inside or outside of the motor cowling.....how are the wires run if the the connection is inside....do the parts that you listed above include parts that seal off the motor from water???????

[boats.net]

I found it, 6K3-82557-00-00 supersedes to 6G1-83557-00-00 it is plastic sleeve that covers the wires.

[dcc134]

If you look at this post, this is the number that you gave me...
http://www.yamahaoutboardparts.com/f...on-th7347.html

[boats.net]

6K3-82557-00-00 is not a good number, not sure what it is.

[dcc134]

Is 6K3-82557-00-00 a good number?

[fairwater]

I have an 04 model 25 yahama that I also want to convert tiller to steering with no electric stuff just throttle and gears. What parts will I need to order to do this? 25mshc 6l2k 1006500

Thanks Tom

[boats.net]

I've got a new 25esh model #6L2KS 1042060 from y'all recently. What parts do I need to convert tiller to remote? I do not want key start or electric choke. Will the parts mentioned in the previous threads work for this newer model #?
Jeff

6L2-48501-11-00 Remote conversion kit
689-61350-02-00 Steering arm
6J8-48511-51-4D Steering hook
701-48101-51-00 701 Side mount control box
(2) MAR-CABLE-xx-SC throttle/shift cables

[jeff180]

tiller to remote 25 ESH

I've got a new 25esh model #6L2KS 1042060 from y'all recently. What parts do I need to convert tiller to remote? I do not want key start or electric choke. Will the parts mentioned in the previous threads work for this newer model #?
Jeff

[boats.net]

The Rigging Guide is the only source of information on control box installation. The control box installation is about the same except for electical and the main harness just plugs into harness on motor.