Yamaha Outboard Parts
Yamaha   Yamaha Outboard Parts
 
Yamaha Outboard Forum Yamaha Outboard Parts Discussion Forum Yamaha Outboard Parts Boat Parts Yamaha Outboard Forum Outboard Motor Parts Contact Us
Yamaha Parts
  #1 (permalink)  
Old 09-05-2012
Junior Member
 
Join Date: Feb 2011
Posts: 8
Default YDS Software

I was able to get my YDS software working this weekend and have a couple of questions regarding operation.
Software is ver 1.33 and database 1.33 connected to (2) 2001 F115's, both show similiar results.
In the operation of the software connection is correct and I can read any sensor errors and the gauge readouts including RPM etc, so I know connection is correct and operation is working. I can get into Option 1 diagnostic Tools, but am unable to access Special Functions #2 or Maintenance Information #3. What I am concerned with is reading engine hours and time at certain RPM's etc. I would like to get full use of the options available in the software.
When I had the engines surveyed by a Yamaha Mechanic he gave me the printout of the finding, but his sheets did not show engine hours either. Is this correct, or am I missing something in my software? Are my engines too old to have this information available on the data bus?
Reply With Quote
  #2 (permalink)  
Old 09-05-2012
Super Moderator
 
Join Date: Dec 2009
Location: Lake Placid, Fl
Posts: 10,383
Default

The #2 and #3 function will not work on your model motor, if you click on save at bottom of screen and then print saved file it will show engine hours in data logger portion of report.
__________________
Regards
Boats.net
Yamaha Outboard Parts
Reply With Quote
  #3 (permalink)  
Old 09-05-2012
Junior Member
 
Join Date: Feb 2011
Posts: 8
Default

Do I have to log something and then and only then does it have a time stamp? In the file I saved with the engine running and not running, there is nothing in section 6 Data Logger (data comparison graph). Everything in this section is blank.
Reply With Quote
  #4 (permalink)  
Old 09-06-2012
Senior Member
 
Join Date: Dec 2010
Location: KDH NC
Posts: 4,879
Default

thats because the early production of the F115 ECU was rather stupid.
most wont show hours and very little else.
Reply With Quote
  #5 (permalink)  
Old 09-06-2012
Junior Member
 
Join Date: Feb 2011
Posts: 8
Default

Thanks for the input. Seeing as being one of the first in the F series I figured it may be limited. Helps with sensors etc. Thanks again.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 12:21 PM.

Outboard Parts

Other Forums
Mercury Parts
Suzuki Parts
Evinrude Parts
Johnson Parts
Honda Parts

Copyright 2000 - 2014, Outdoor Network LLC