Yamaha Outboard Parts
Yamaha   Yamaha Outboard Parts
Yamaha Outboard Forum Yamaha Outboard Parts Discussion Forum Yamaha Outboard Parts Boat Parts Yamaha Outboard Forum Outboard Motor Parts Contact Us
Yamaha Parts
  #1 (permalink)  
Old 01-14-2007
Barry L. Siple
Posts: n/a

Today I tried to install a new water pump impeller in my 150 yamaha outboard. I got everything apart OK except for the spacer and drive shaft collar. It was a bugger to get off to say the least and I ended up damaging this assembly. After I get the parts to complete this repair I need help. How do I correctly install the washer, wave washer, washer,spacer and drive shaft collar so that it comes off next time???Thanks,Barry
Reply With Quote
  #2 (permalink)  
Old 01-15-2007
Junior Member
Join Date: Dec 1969
Location: Mandurah Australia
Posts: 6

Hi Barry
ihave emailed you aCD copy of yamaha workshop manual let me know if you dont get it
Reply With Quote
  #3 (permalink)  
Old 01-28-2007
Junior Member
Join Date: Dec 1969
Location: Melbourne, FL
Posts: 20

Check out this link--best How To I've ever seen.


I wouldn't have tried if from hte Service Manual. The writer of this post should be a technical writer for somebody. THe text and the pictures are fool proof--
Reply With Quote
  #4 (permalink)  
Old 05-19-2009
Posts: n/a

could you please e-mail me a cd for replacing the water pump on a 1998 V Max 150 2 stroke engine. I need the part about removing the lower case and replacing the pump housing and water tube grommet, thanks- Lionel at lsabouri@mts.net
Reply With Quote
  #5 (permalink)  
Old 05-19-2009
Posts: n/a
Default check your parts

Might want to double check that you get all the parts you need in your repair kit. I did not get all needed parts in mine. I needed a small plastic piece that broke when I took out my original 2 years back. Had to drive an hour down and back to get the extra part. Just barely beat the tide as i was doing this during low tide.

Reply With Quote
  #6 (permalink)  
Old 05-23-2009
Posts: n/a
Default yamaha ft 50tlrw

can anybody help me i am replacing a water pump on my motor but i can find hte last thing to do there must be a tric to that cause i remouve all the bolt (5) olding the bottom of the drive but it still wont comme out if someone got a diagram or a step by step solution i would really appriciate tank you
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:47 AM.

Outboard Parts

Other Forums
Mercury Parts
Suzuki Parts
Evinrude Parts
Johnson Parts
Honda Parts

Copyright 2000 - 2017, Outdoor Network LLC