Yamaha Outboard Parts
Yamaha   Yamaha Outboard Parts
 
Yamaha Outboard Forum Yamaha Outboard Parts Discussion Forum Yamaha Outboard Parts Boat Parts Yamaha Outboard Forum Outboard Motor Parts Contact Us
Yamaha Parts
  #1 (permalink)  
Old 05-27-2013
Junior Member
 
Join Date: Dec 1969
Posts: 15
Default Low voltage at remote pump motor

i have twin 150etxd on a 1990 Grady.
Had a ungrounded sensor on the port remote oil tank giving a yellow indication
Read all the posts and fixed that..thanks.
Problem is now when measuring voltage at brown wire at pump I get 7.5 volts.
I have 12.45 at yellow wire at key and then 8.0 at yellow wire on motor.

Could some internal corrosion in the wire harness really cause this much voltage drop ?

Motor runs good but no oil gets pumped to main tank normally or with emergency switch. Connecting 12 volts directly to brown wire at connector on motor remote tank pumps oil fine.
Thanks for all the help
Reply With Quote
  #2 (permalink)  
Old 05-27-2013
Senior Member
 
Join Date: Dec 2010
Location: KDH NC
Posts: 9,062
Default

yep, check the connector at the engine to oil tank harness, if that still shows bad voltage under a load then unwrap the harness and find the bad splice about 6" aft of the 10 pin main harness.
Reply With Quote
  #3 (permalink)  
Old 05-27-2013
Junior Member
 
Join Date: Dec 1969
Posts: 15
Default

Thanks,
As soon as the gale passes I'll take a look. Blowing 50s at Newport, or.!
Reply With Quote
Reply

Tags
corrosion, remote oil tank, wire harness

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 09:41 PM.

Outboard Parts

Other Forums
Mercury Parts
Suzuki Parts
Evinrude Parts
Johnson Parts
Honda Parts

Copyright 2000 - 2017, Outdoor Network LLC