Yamaha Outboard Parts
Yamaha   Yamaha Outboard Parts
 
Yamaha Outboard Forum Yamaha Outboard Parts Discussion Forum Yamaha Outboard Parts Boat Parts Yamaha Outboard Forum Outboard Motor Parts Contact Us
Yamaha Parts
  #1 (permalink)  
Old 07-01-2006
Junior Member
 
Join Date: Dec 1969
Posts: 8
Post

Help, i am replacing most of the parts on the water pump of my 225 Vmax and I cannot get the woodruff key to come out of the drive shaft. The thing is really stuck. Anybody have any ideas how to get it out so I can pull the lower plate off of there.
Reply With Quote
  #2 (permalink)  
Old 07-01-2006
Hamfisted
Guest
 
Posts: n/a
Post

I usually just pound the crap out of it with a metal punch and hammer. The new kit comes with a new one. You can try something like JB Blaster and heat if you have it handy.


Mike
Reply With Quote
  #3 (permalink)  
Old 07-01-2006
Senior Member
 
Join Date: Dec 2009
Location: W.P.B. FLA
Posts: 2,381
Post

yes they can be a pain...flat center punch and hammer, i hold the punch with visegrips, push from top down and in,and try not to blow out the slot in the shaft too much.
Reply With Quote
  #4 (permalink)  
Old 07-02-2006
Ken
Guest
 
Posts: n/a
Post

vafishing,
Try a chisel on the top side of the woodruff key.
Put the chisel edge between the key and the driveshaft. Tap lightly.
I usually squirt some liquid wrench on the key and let it soak for an hour before I take the chisel to it.
Good luck [img]smile.gif[/img] ,
Ken K
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 12:13 AM.

Outboard Parts

Other Forums
Mercury Parts
Suzuki Parts
Evinrude Parts
Johnson Parts
Honda Parts

Copyright 2000 - 2014, Outdoor Network LLC