Announcement

Collapse
No announcement yet.

6y8 gauges to raymarine mfd

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 6y8 gauges to raymarine mfd

    Hello everyone, looking for some help with my new boat. I'm looking to connect my 2016 F200 motor to a raymarine es98. It seems my 6y8 gauges were installed without a hub. Is it still a possibility? I have the Yamaha to raymarine cable and the raymarine interface. Thanks for any help / direction.

  • #2
    Originally posted by Buccamachine View Post
    my 6y8 gauges were installed without a hub. Is it still a possibility? I have the Yamaha to raymarine cable
    its certainly possible - but I think you'll have to buy a "hub" to do it.

    Yamaha just doesn't offer much flexibility for "expansion" in their CL parts.

    I'm guessing you have an "inline hub" -




    replace that with a "MULTI-HUB ASSEMBLY 6Y8-81920-01-00 " and you will have an available "device" port to connect your raymarine adapter cable to.

    Now, IDK if the hub comes with a "MAIN BUS TERMINATOR RESISTOR CAP 6Y8-85371-01-00" - if it doesn't you'll need that too

    Comment


    • #3
      Thank you for the prompt advice.
      Do these parts look like they'll get me where I'm going?
      3 PORT MULTI-HUB ASSEMBLY 6Y8-81920-01-00
      GRAY MAIN BUS TERMINATOR RESISTOR CAP 6Y8-85371-01-00
      8 FT POWER LEAD 6Y8-83553-01-00

      Comment


      • #4

        Comment


        • #5
          Thanks for all the help. Got my parts ordered. Hopefully everything will go smoothly.

          Comment

          Working...
          X