Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Can I add trim lift to 1991 C40ELRP outboard

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can I add trim lift to 1991 C40ELRP outboard

    Does anyone know if the trim lift kit 6h5-43840-05-EK can be used on the C40ELRP engine? If not, are there other trim kilts that could work. From the diagrams I saw, the parts all seem to match.

  • #2
    That trim unit is nla new.

    Comment


    • #3
      I found a used one if that kit will work

      Comment


      • #4
        I can not tell you that for sure, Boscoe may.

        Comment


        • #5
          a manual tilt electric start motor, probable has different parts on it beside the T&T Cylinder.
          Maybe Someone can comment on that also

          If it was mine I would be looking for a aftermarket T&T unit to bolt the motor onto

          Comment


          • #6
            Originally posted by tomcat123 View Post
            I found a used one if that kit will work
            What kit?

            6H5-43840-05-EK is the power trim and tilt assembly. Just a part.

            https://www.boats.net/product/yamaha...h5-43840-05-EK

            Comment


            • #7
              Originally posted by 99yam40 View Post
              a manual tilt electric start motor, probable has different parts on it beside the T&T Cylinder.
              Maybe Someone can comment on that also

              If it was mine I would be looking for a aftermarket T&T unit to bolt the motor onto
              I would think so. Clamp brackets, swivel bracket, wire harness, relays, and a few other doodads.

              As you suggest, I would go with the CMC power trim and tilt unit that mounts to the transom and that holds the motor.

              Comment


              • #8
                Panther Marine is another manufacturer for a T&T unit. That'd be the way I would be looking into, as well.
                2000 Yamaha OX66 250HP SX250TXRY 61AX103847T
                1982 Grady Weekender/Offshore (removed stern drive & modded to be an OB)

                Comment


                • #9
                  I like the Panther model.

                  https://3989ac5bcbe1edfc864a-0a7f10f...ansen_copy.pdf

                  https://www.basspro.com/shop/en/panther-by-marine-tech-model-55-trim-and-tilt

                  Comment

                  Working...
                  X