Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Cleaning ISC on F90TLR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cleaning ISC on F90TLR

    Can the ISC be disassembled and ultrasonically cleaned in Simple Green or is there a better approach?


  • #2
    "its an electric motor" - so personally,
    I am not enthusiastic about either the need, nor the benefit, of "cleaning"

    just a hint though,
    if you decide to remove those tamper-resistant Torx screws to 'get at it" -
    don't try the YDIS "ISC test" while you have it apart;

    https://vimeo.com/304454822

    Comment


    • #3
      fairdeal...I remember awhile back someone posting a comment about not using with YDS.

      I did clean and it seem to resolve the issue...at least for now.

      The part is $200+ which is a little spendy for this dude.

      Comment


      • #4
        You might try some brake cleaner and light lube on the unit (just an idea).

        Worse case scenario (if it's not working correctly), sonic clean, make sure it's dry, blow with compressed air, electrical contact cleaner, lube.

        I've Sonic cleaned spark plugs (worked fair), didn't hurt the plugs, did take several heated cycles (water and dish soap) to get them clean..


        Found this video, might be worth a try:
        https://www.youtube.com/watch?v=iyEtu2cw_Gk
        Last edited by TownsendsFJR1300; 12-05-2018, 07:27 AM.
        Scott
        1997 Angler 204, Center Console powered by a 2006 Yamaha F150TXR

        Comment

        Working...
        X