Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

fuel leak 50 hp carb model

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • fuel leak 50 hp carb model

    Hey all,

    Pic shows carbs from a t50, back side fuel feed t fitting broke.
    Have not found where to buy new fitting or how to take out.

    Thanks for any and all help

    hark
    Attached Files

  • #2
    That fitting is not available from Yamaha.

    Either buy a new carburetor body, or

    drill out what you have and try and find something that will work as a replacement.

    You are on your own now. Time to become your own modification engineer.

    Comment


    • #3
      Yep, not good.

      Plastic into aluminum, may be glued or ? ) into the aluminum body.

      Perhaps a small tap and a fuel line fitting tapped and inserted into the broken hole. Basically making a half plastic, half brass "T" fitting.

      If that doesn't pan out, try removing the entire plastic piece (nothing to loose at this point) again, drill and tap and get a regular brass fuel fitting in there. Then, "T" off of that (space permitting)

      * In the future, if you can keep it on one thread is a little easier for the members following/helping. Thanks.

      And please post what your final fix is..

      Good luck.

      Comment


      • #4
        Sorry about the two post, most be losing it..
        Have carbs from spare engine on now
        Will post fix when it happens....

        Comment


        • #5
          get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
          cheers

          Comment


          • #6
            Originally posted by madharchod View Post
            get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
            cheers
            If so, make sure its compatable with fuel.

            Comment

            Working...
            X