fuel leak 50 hp carb model

[TownsendsFJR1300]

get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
cheers

If so, make sure its compatable with fuel.

[madharchod]

get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
cheers

[captainhark]

Sorry about the two post, most be losing it..
Have carbs from spare engine on now
Will post fix when it happens....

[TownsendsFJR1300]

Yep, not good.

Plastic into aluminum, may be glued or ? ) into the aluminum body.

Perhaps a small tap and a fuel line fitting tapped and inserted into the broken hole. Basically making a half plastic, half brass "T" fitting.

If that doesn't pan out, try removing the entire plastic piece (nothing to loose at this point) again, drill and tap and get a regular brass fuel fitting in there. Then, "T" off of that (space permitting)

* In the future, if you can keep it on one thread is a little easier for the members following/helping. Thanks.

And please post what your final fix is..

Good luck.

[boscoe99]

That fitting is not available from Yamaha.

Either buy a new carburetor body, or

drill out what you have and try and find something that will work as a replacement.

You are on your own now. Time to become your own modification engineer.

[captainhark]

Hey all,

Pic shows carbs from a t50, back side fuel feed t fitting broke.
Have not found where to buy new fitting or how to take out.

Thanks for any and all help

hark