Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

fuel leak 50 hp carb model

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • captainhark
    started a topic fuel leak 50 hp carb model

    fuel leak 50 hp carb model

    Hey all,

    Pic shows carbs from a t50, back side fuel feed t fitting broke.
    Have not found where to buy new fitting or how to take out.

    Thanks for any and all help

    hark
    Attached Files

  • TownsendsFJR1300
    replied
    Originally posted by madharchod View Post
    get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
    cheers
    If so, make sure its compatable with fuel.

    Leave a comment:


  • madharchod
    replied
    get a plumber who does plastic fitting ie compression and sleeving ,he will fix it for you no problem
    cheers

    Leave a comment:


  • captainhark
    replied
    Sorry about the two post, most be losing it..
    Have carbs from spare engine on now
    Will post fix when it happens....

    Leave a comment:


  • TownsendsFJR1300
    replied
    Yep, not good.

    Plastic into aluminum, may be glued or ? ) into the aluminum body.

    Perhaps a small tap and a fuel line fitting tapped and inserted into the broken hole. Basically making a half plastic, half brass "T" fitting.

    If that doesn't pan out, try removing the entire plastic piece (nothing to loose at this point) again, drill and tap and get a regular brass fuel fitting in there. Then, "T" off of that (space permitting)

    * In the future, if you can keep it on one thread is a little easier for the members following/helping. Thanks.

    And please post what your final fix is..

    Good luck.

    Leave a comment:


  • boscoe99
    replied
    That fitting is not available from Yamaha.

    Either buy a new carburetor body, or

    drill out what you have and try and find something that will work as a replacement.

    You are on your own now. Time to become your own modification engineer.

    Leave a comment:

Working...
X