If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There may be a plastic or neoprene seal either on the needle or in the body of the valve that may be cracked or damaged? The float should stop the fuel flow when it raises the needle....
It's just 3 pieces, float, the pin that it sits on, and the needle valve that is supposed to move up and down. In the diagram, parts 7, 8, and 9.
Tweet
Comment