Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Water pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Water pump

    Upon disassembling my water pump, a seal was stuck on the shaft. This seal was above the small metal cover for the rubber impeller. Does this metal seal belong in the main plastic water pump cover?

  • #2
    You didn't say what model engine you have but if it is a late model V4 or V6 it has a spacer,collar and set of washers to take end play out of drive shaft and they do need to be installed

    Comment


    • #3
      It is a 1988 150 HP ETXG. Yamaha dealers do not show this year on thier exploded views. I was able to find the items that you stated under an older model parts page. I hope they fit.

      Comment


      • #4
        They didn't use that in 1988, It must have a newer lower unit on it

        Comment


        • #5
          You are right. I remembe having the lower unit replaced with a 1994.

          Comment

          Working...
          X