Quote:
Originally Posted by robert graham
Looks like marine grease oozing fom those upper pivot poin bearings, mine does that every time I grease the pivot point zerk fitting. There's always a blob of grease there, probably helps keep the water out of the bearing. Try pumping that zerk fitting and watch that area to see it ooz out! Good Luck!
|
I've greased that zirk several times, the grease I use is not that color. I thought the exact same thing myself. I'm almost positive its yamalube. I have heard that the output bushing/seal can cause this same issue, but can't be for sure. Thanks for the reply.