View Single Post
  #9 (permalink)  
Old 3 Weeks Ago
TownsendsFJR1300's Avatar
TownsendsFJR1300 TownsendsFJR1300 is offline
Senior Member
 
Join Date: Aug 2011
Location: Cape Coral, Florida
Posts: 5,605
Default

I don't remember seeing that much water come out of there... Perhaps the seal for the water tube moved.

Here's a short video of mine on muffs, no water from there(F150):
https://www.flickr.com/photos/147134...in/dateposted/


As for grease on the bolts, if used in salt water, out resident MT does NOT use loctite (as per the manual).


I put just a light coating of Yamaha's water proof grease on the threads of the WP housing and snug it down. Same for the mounting bolt threads. You won't find a torque spec for that WP housing either as there is NONE officially.
__________________
Scott
1997 Angler 204 CC, 2006 F150 TXR

Last edited by TownsendsFJR1300; 3 Weeks Ago at 03:29 PM.
Reply With Quote